Ed Harris 38 special carry load - Cast Bullet Forum
2011年11月4日 · Ed Harris wrote: runfiverun wrote: try the old 2.7 gr bullseye.. To match factory velocity with current Alliant product and Remington 148 HBWC flush seated you need to use 2.8 to 3.0 depending upon the case and primer.
Ed Harris 45 Cal Cast Bullets; 45 Colt (Ruger Level Loads)
2017年2月18日 · Ed sent along a request to test his 45 Colt “Ruger “level loads consisting of 7.5 gr Bullseye under the 45-240H1, 45-262H and 7 gr under the 45-290H cast bullets. None of the three loads generated a MAP higher than the “classic” 45 Colt load of 8,5 gr Unique under a 250 gr 454190 RNFP cast bullet.
Ed Harris 45 Cal Cast bullets: 45 Colt
2017年2月18日 · Ed Harris 45 Cal Cast bullets: 45 Colt A three of Ed’s bullets (45-240H1, 45-262H & 45-290H) were all tested in “standard” level 45 Colt loads intended for the Colt and clones SAAs consisting of 6 gr Alliant Bullseye. Cases were …
"The Load" Is 13 grains of Red Dot - Cast Bullet Forum
2007年9月27日 · Ed Harris posted this 05 October 2007 In my experience 700X burns faster by about 1.5 to 2 grains in the '06 for the same velocity. 73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
A Question for Ed Harris on 32 Auto Factory Ammunition
2016年10月9日 · I have not worked at all with the 1934 Mauser. Other WW2 era pistols I have tested, Colt 1903, CZ27, Beretta M1935, Walther PP all fed and functioned 100% reliably with CIP-Euro 73-grain FMJ by Fiocchi, RWS, Sellier & Bellot or equivalent handloads using 2.4-2.5 grains of Bullseye or 3 grains of AutoComp with 71-grain FMJRN bullets by CBC, Hornady, or Remington, at a ctg. OAL of 0.96-0.975".
Plain Based/Gas Check Question Military Loads CE Harris Work
2009年10月18日 · Ed Harris wrote: For plainbased bullets in 150-180 grain range with current Alliant Bullseye and standard large rifle primers DO NOT EXCEED: 5.0 grains in the 7.62x29 6.0 grains in the .30-30 7.0 grains in the .30-40 Krag, 7.7 Japanese, 7.65 Argentine. 308 Win., or .303 British 8.0 grains in the 7.62x54R, .30-'06 or 8x57mm DO NOT INCREASE these ...
Ed Harris and the 310 tool - Cast Bullet Forum
2013年1月16日 · Ed Harris posted this 19 January 2013 The technique I was taught to use charge cups by Frank Marshall was to have the powder in a coffee cup or rice bowl, then with the charge cup held upright, push it down into the powder, letting it flow in of its own weight, then raise it straight up and strike off with a card.
.303 British "The Load" - Cast Bullet Forum
2016年9月21日 · Ed Harris posted this 22 September 2016 I've no experience with the plated bullets in rifles, but in revolvers they needed lighter loads as used for lead, raher than treating like jacketed. I would avoid max loads.
My Thirty Years With Ed's Red - Cast Bullet Forum
2021年2月19日 · My Thirty Years With ''Ed's Red'' Bore Cleaner... Home-Mix Still Works. By C.E. ''Ed'' Harris - Updated 2/20/2021. Thirty years ago I mixed my first "Ed's Red" or "ER" bore cleaner. It has passed the test of time. Thousands of satisfied users think this home-mixed cleaner is every bit as effective as more expensive commercial products.
.32 ACP conversion on Remington 580 - Cast Bullet Forum
Ed Harris posted this 30 December 2016 Andy Evans converted a Remington Model 580 single-shot bolt action .22 LR to center-fire and relined and rechambered to .32 ACP for me. I recently chronographed a few .32 ACP +P high performance loads I have been testing in my Walther PP, just to see what they would do in a longer 22” rifle barrel.