2015年4月13日 · About the lightest you could make a conventional loader frame is going to be about 100 lb. Add to that, cylinders @ 7 lb each, pump @10 lb, hydraulic lines @ about 20 lb, and about 2 gallons of fluid (12 lb), oh yeah, and a bucket at about 50 lb. Total loader weight approximately 225 lb, balanced on the front axle.

2013年8月20日 · I've decided a small front end loader would be an invaluable asset around my 3.5 acre property and fabrication shop. The plan is to build one for my john deere L130, which I realize is an ambitious task given it being such a lighter duty jd. With that said it does have a heavy duty enough frame...

2015年2月11日 · Yes, I have a 1995ish Snapper 2200 with a factory front end loader that I will be sellling in the near future: It is a 16" rear tire-9.5X16" ags, 4x12 front. Hydrostat with hand control, Power Steering. I bought it from the original owner last year who had used it as a dedicated loader tractor. It shows 177 hrs on a working meter.

Joined Apr 7, 2015 Messages 18,176 Location Crossville, TN Tractor Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.

2018年8月12日 · At the time Kubota made these tractors, it was very rare to see a loader on such a small tractor. So they are not really ready to easily install a loader. There are the aftermarket ones but as mentioned before, the price is just to much. I also was looking for a loader when I had my B7000. Ended up building one myself. Which worked perfectly.

Oct 25, 2016 / Limb saw for front end loader? #10 . k0ua Epic Contributor. Joined Jun 28, 2009 Messages ...

2019年2月22日 · If you are going to be making a font end loader I think you will find that the HF stuff uses junk steel and it is usually light weight. I think you would be better off buying a 20 foot piece of steel tubing. I built a loader for a compact Ford tractor I had and I used 3/16 wall thickness for the lift arms. It is still in use 20 years later by ...

2004年1月23日 · I have a Massey Ferguson Model 232 front loader, and I need 60" width. ... Jan 24, 2004 / DIY Loader ...

2013年8月1日 · I built a loader for a 4110 which is a size larger than the 317 - 318 series and has four wheel drive. No plans, just built as I went off photos of like machines. With four rams, lines, hoses, steel, and pins it was less than $800 including the 53" quick tach bucket. The internal hydraulic pump is more than adequate. Fun project.

2019年3月26日 · It was a 2012 model with 100 hours, front loader and tiller. I've since done some work with it around home, and was a bit disappointed with how it dug. I watched some youtube videos to improve my technique, and purchased a BXpanded pirhana tooth bar, which helped some, but not a lot on rocky hard pack soil.