2022年7月12日 · You can wire the sensors to the light separately in a parallel circuit, and they will work independently. To explain in a bit more detail, let’s take a look at: Whether it’s possible to have two motion sensors working on the same light; Why you can’t daisy-chain motion sensors; How to wire multiple motion sensors on one circuit

You can have as many motion sensors as you want in parallel. Figure 2 - Schematic wiring diagram for multiple motion detectors with 120VAC lighting Figure 3 - Drawing of actual wire connections for installing multiple motion sensors

2010年1月31日 · You basically wire the sensors as if they were three way switches. One side gets the feed the other the load. The neutrals feed the motions and the load. The reds connect the red on the sensor and the loads and the feed ties to the black on the sensors.

2015年12月22日 · I would like to wire multiple motion detector light kits in parallel, so when one motion detector is tripped it will turn on all three lights. Each light kit has 2 LED lights on it. Schematic and...

2015年10月6日 · In order to use a second motion sensor..... you would need to run a piece of three wire cable between them so that you had them both connected in parallel. You must connect red to red, white to white and black to black.

2013年3月10日 · I drew the motion lights wiring. All the white wires associated with the motion light assembly are neutral. The single black wire supplies power to the motion switch. The red wire is the switched 120 volts out from the sensor and it goes to both lamp holders. You can parallel two of these motion sensors since the output line (red) is relay ...

2023年2月15日 · You can wire two motion sensors to the same light but cannot connect them. Otherwise, both would have to activate the light. It is possible to wire the sensors separately in parallel circuits, and they will work independently.

How do I wire the two motion sensors so either will trigger the lights to come on? Wire nut together the motion sensors so that they are in parallel and will then so provide a path to the light if either is switched on. Here is a wiring diagram (minus the grounds that must be pulled along):

The only recommendation I am suggesting is you can save a few steps and supplies by making it a 3 way circuit instead of 2 separate sensors, but either way will work, except controlling 1 light fixture from 2 sensors, because of how the sensors are …

2015年3月16日 · Can multiple 2-way occupancy (AKA motion) sensor switches be used together? For the top and bottom of a staircase, I want the lights to be on if either switch senses motion and the lights stay on ...