1. Open the both side panel and remove them. 2. Remove 2 screws. 3. Removal of cable management completed.

(1) Unscrew the two screws next to the cable cover. (2) Open the cable box on the right side of PA602 and remove the cables inside. (3) Removal of cable box completed. (1) Squeeze inward with two fingers to remove mounts from the latches. …

Disconnect cables, connectors, and power plugs by pulling the plug evenly to avoid damage. Use the correct screw models on your Notebook PC to prevent damage. Confirm that the cable orientation is correct before connecting any cables. Fully remove all adhesive residue after removing and before installing any components.

2024年5月4日 · When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly. 4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process. 1. Open the both side panel and remove them. 2. Remove 2 screws. 3.

(1) Loosen the screw on the plastic cable clip. (2) Removal of the plastic cable clip completed. Visit ASUS official website to learn more about TUF Gaming GT302 ARGB https://www.asus.com/motherboards-components/cases/tuf-gaming/tuf-gaming-gt302-argb/

Disconnect cables, connectors, and power plugs by pulling the plug evenly to avoid damage. Use the correct screw models on your Notebook PC to prevent damage. Confirm that the cable orientation is correct before connecting any cables. Fully remove all adhesive residue after removing and before installing any components.

2011年5月10日 · Rerouting your front panel connectors, I found a small hole where the cables were able to fit through, 1 by 1. Result, you get a clean entry straight to the front panel header. You can also route your front panel USB and AUDIO cables through the opening behind the power supply. Step 2: Reroute your fan cables.

2024年1月24日 · Remove the left/right glass side panels. 2. Open and remove the cable cover. 3. Remove the 3 screws on the right side and pull out the right front panel aluminum part. 4. Separate the right side aluminum panel from the front glass (be careful to hold the front glass tightly to prevent it from falling).

and select the appropriate tools to disassemble/assemble for the ROG Strix (G13CH) desktop. Please accord to different screw specification to choose different screwdriver and head. Use a pair of tweezers to remove/insert/tidy cables. Please be sure to pull out AC POWER CORD. Step 1 : Remove screws *4pcs.

2024年1月24日 · Remove the left/right glass side panels. 2. Unlock two screws and open the cable cover. 3. Remove the fan and FIO cables and the SATA power supply plugged into the motherboard. 4. Remove the 3 screws to replace the FAN HUB. Was this information helpful?