2008年5月16日 · My saab engine manual says to use anaerobic sealant when reassembling the timing cover (its a lot of fun trying to find this stuff). So I used it, and torqued the timing cover bolts to spec. Some of the excess sealant sqeezed out of the cracks (I neglected to wipe if …

2008年7月26日 · The sealant will remain in fluid form and won't block the strainer. Anaerobic sealant cures only in the absence of air and under pressure. It's specifically designed so that excess does not damage the engine. FWIW Loctite 518 is the Saab recommended anaerobic sealant, but I expect Permatex works just as well.

2010年6月15日 · Anaerobic sealant hardens when it's not exposed to air, for example in between the engine and oil sump surfaces. It remains liquid when it is exposed to air, for example when squeezed out to the sides inside/outside the sump.

2015年6月13日 · Is a little anaerobic sealant on the pickup bad or does it just work it's way through the system when warm. I had not done an oil change since the rod bearings - I was giving it a week before changing.

2019年4月12日 · As Qwik pointed out, when he referenced the GM RTV sealant (GM 88864346 RTV engine sealant), unlike the NG900/OG9-3 models, GM/Saab did NOT specify an anaerobic sealant for the inline four 9-3 (9440) models. For sump to block mating for 2004 9-3 models WIS specs 83 95 691 flange sealant.

2008年12月2日 · gasket or anaerobic sealant? Confused! Jump to Latest 1.9K views 4 ...

2006年9月5日 · The recommended type of anaerobic sealant doesn't do any of this, it doesn't affect any devices and only the sealant that gets trapped in the joint itself cures, any excess squeezed out dissolves and causes no problems with the strainer screen. Regards, John.

2013年7月3日 · Using anaerobic sealer is an easy way to avoid a major problem. Why worry about the cost of a simple tube of sealer that will last for years when you're talking about an engine? 97 NG900 SE, B234R, GT3071R, (~340 WHP, 400 WTQ)

2008年4月24日 · Pan is off and clean (yes, EasyOff works!!). I'm ready to reattach it and popped into local big box automotive parts store. WOW! Lots of choices. Please make a suggestion as to a particular brand, type, number, etc. Thanks.

2010年12月23日 · Cleaned and resealed oil pan with anaerobic sealant (including cleaning and new o-rings on crossover tube, cleaning and new o-ring on pickup tube, and dipstick tube.) Replaced whole PCV system with new OEM PCV6. Replaced oil pressure valve, spring, o-ring with new OEM. Oil level is normal.