For bonding the radar housing, the task is simple: seal the housing and all of its contents, including the PCB and antenna, to the radome. Silicones are the most widely used materials for this.

Panacol has developed a new UV adhesive specifically for foil lamination of organic (OPV) and perovskite-based (PSC) photovoltaic systems: Vitralit® UH 1411 is a very flexible, hybrid epoxy ...

The average person’s experience with an ultraviolet (UV) wand is getting a cavity at the dentist. However, anyone with a resin-based 3d printer knows how important a UV curing system is.

The latest products, however, are fast-curing and low shrinkage at the same time, he says. The downside of ultraviolet-cured adhesives is that they are more costly and require some sort of light ...

Panacol, a Germany-based adhesive technology supplier, says its new UV adhesive is specifically designed for sealing and bonding flexible PV modules.

However, the vast majority rely on UV light to cure prints ... Thus, it was time to build a compact UV curing station to get the job done. The build consists of a series of laser-cut panels ...

the thickness of the adhesive layer and the distance from the light to the adhesive. This no-mix system requires a post cure with heat, and adheres well to both similar and dissimilar substrates.

The demand for UV tapes is a significant drive in the global market due to their design to cure using ultraviolet light. These tapes are widely used in several end-use industries, such as healthcare, ...

“Conventional light curing adhesives do not allow light penetration beyond 1 mm. LED415DC90’s key distinguishing factor is its ability to partially cure or fixture up to 6 mm deep or in cross ...